- info@dqrenovations.com
- 39 N Pine Ave Albany, NY 12203
- www.dqrenovations.com
Mold hurts your health and your property – and it keeps coming back if the moisture isn’t fixed. DQ Renovations removes the mold, repairs what’s causing it, and rebuilds the damaged area. NYS licensed, start to finish.
NYS Licensed
Article 32 compliant
Safe Containment
HEPA air scrubbing
Removal + Rebuild
One company, start to finish
Free Inspection
No-obligation estimate
Mold grows wherever there’s moisture, and it can start within 24 to 48 hours of a leak or flood. Wiping it away doesn’t help if the water problem is still there – it comes right back. That’s why every job starts with finding the moisture source.
DQ Renovations is a local Albany contractor that handles the full job: safe mold removal, fixing the leak or moisture issue, and rebuilding the damaged drywall, insulation, and finishes. One team, fully licensed, from inspection to the final coat of paint.
Licensed & compliant
Removal & rebuild
Albany based
Mold isn’t always easy to see. If you notice any of these, it’s worth getting your property checked.
Black, green, or white spots on walls, ceilings, grout, or around windows.
A damp, earthy odor that won’t go away – often the first sign of hidden mold.
Brown or yellow marks on walls or ceilings that point to a past or current leak.
Any past water damage – burst pipe, flooded basement, roof leak – can lead to mold.
Coughing, sneezing, headaches, or worse allergies that ease when you leave the house.
Foggy windows, peeling paint, or damp spots in basements and crawl spaces.
From black mold in the basement to a leaky attic, we remove the mold, fix the cause, and restore your space for homes and businesses across the Capital Region.
Safe removal of black and toxic mold, following strict containment and safety steps.
We seal off the work area and use HEPA air scrubbers so spores don’t spread.
The most common spot for mold. We remove it and fix the dampness behind it.
Roof leaks and poor airflow cause attic mold. We clear it and improve ventilation.
Tight, damp crawl spaces hide mold easily. We treat them and control moisture.
Humidity and plumbing leaks make these rooms mold hot spots. We clean and prevent it.
The key to stopping mold for good – we find and fix the leak or moisture problem.
New drywall, insulation, and paint to restore your space after the mold is cleared.
Our mold specialists will inspect your property and provide a clear remediation plan.
Good to know: New York State law (Labor Law Article 32) requires a licensed assessor and a licensed remediation contractor for mold jobs over 10 sq ft – and they must be separate companies. We follow this process exactly to protect you.
We visit your property, find the mold and the moisture source, and explain your options.
An independent NYS licensed assessor tests and writes the official work plan. We can recommend trusted ones.
We set up containment, run HEPA scrubbers, and remove all mold following the protocol.
We repair the moisture source and dry the area so the mold can’t come back.
The assessor confirms the area passes, then we rebuild the drywall, insulation, and finishes.
Whether your mold came from a covered leak or flood, dealing with the claim is stressful. We document the moisture source and damage, and work with your insurance company to support your claim.
See why homeowners and businesses trust our team for quality siding installation, expert craftsmanship, and exceptional customer service.
★★★★★
“We had black mold in the basement and that musty smell all through the house. DQ found the leak causing it, removed everything safely, and the smell is finally gone. So thorough.”
★★★★★
“They explained the whole New York process and worked with the assessor so it was done by the book. Removed the mold and rebuilt the wall – one company for all of it. Highly recommend.”
★★★★★
“Mold in our attic from a roof leak. DQ fixed the source, cleared the mold, and improved the airflow so it won’t come back. Honest pricing and clean work.”
Yes. New York's Labor Law Article 32 requires a licensed contractor for any mold job over 10 square feet. The law also requires the inspection and the removal to be done by separate companies, to protect you. We follow this process and work with independent NYS licensed assessors.
By New York law, the company that removes the mold can't also be the one that officially tests it on the same job. We give you a free visual inspection to find the problem, then an independent NYS licensed assessor does the formal testing and writes the work plan. We can recommend trusted assessors in the area.
Not if the moisture source is fixed. Mold needs water to grow, so we always repair the leak or dampness behind it — not just remove what you can see. This is the key to keeping it gone for good.
Most home projects take about 3 to 5 days. Removal and containment come first, then cleaning and treatment, then drying and clearance testing by your assessor. Larger jobs or those with major repairs can take longer — we give you a clear timeline after the inspection.
Usually yes, as long as you stay out of the work area. We seal off the space with containment barriers and run HEPA air scrubbers to keep spores from spreading to the rest of your home. For larger jobs, we'll advise if you should stay elsewhere.
Yes - this is what sets us apart. As a full renovation contractor, once the area passes clearance we rebuild the drywall, insulation, and finishes in-house, so you don't need a separate company for the repairs.
